A Site Dedicated to all enthusiasts of Classic Style Banjo
Hi All
I am new to Classic Banjo after playing Bluegrass style for a few years with picks.
One day I came across a piece called Nola and was amazed by the intricasies of the piece.Since that day I have been hooked on the Classic Banjo style and like many people,I suspect, was unaware of the popularity and number of pieces written in the late 1800's and early 1900's.About a month ago I traded in my resonator Banjo for an open back Gold Tone OT800 fitted with nylon strings.The strings fitted were of a light gauge and I found them really difficult to pick as they felt slippery and quite slack.After speaking to Ian(the reallyniceman)he suggested I try Chris Sands heavy gauge.What a difference!!!
I can now get a good grip with my picking fingers as the heavier gauge feel tighter and the sound is so much snappier especially up the neck.Thank you Ian for that advice.Now I feel that I can make some progress in the wonderfull world of Classic Banjo
Tags:
Thank you Mel, I have always preferred heavy gauge nylon strings. I find that, as you say, they are both easier to play and give a better sound! If you have not done so already another suggestion would be to fit a maple bridge (no ebony cap). A "Morley Style" is preferable. Then you will really hear the banjo spring to life :-)
These, of course, are personal choices and I had so many disputes in the past about the true "classic sound" that it is nice to hear your comments. We will have you sounding like Vess Ossman or Fred Van Eps yet!! Check out Van Eps's version of Nola on the JUKEBOX and be amazed !
Thanks Ian,
I have fitted a Morley Maple Bridge and it does indeed make a difference, and now with heavy gauge strings fitted I just have to get my fingers in the right place at the right time to sound like a true pro!!
Thanks again for the advice,I'm glad I made the switch.
© 2024 Created by thereallyniceman. Powered by